Home >> Products >> Bar Grating >> Bar Grating Dimensions | Bar Grating

Bar Grating Dimensions | Bar Grating

    Bar Grating | McNICHOLS

    1.At McNICHOLS we carry a wide variety of Bar Grating. Our products include Welded, Swage-Locked, Press-Locked, and Clinched styles in many bar sizes, spacings and materials. Applications include walkways, platforms and trenches. Stock panels or fabrication at all 19 locations. Email us today.

    2.Steel Bar Grating with bearing bars thicker than 3/16" is considered to be "Heavy Duty" and carries the designation prefix "Type HD". Available bar thicknesses are 1/4" () , 5/16" () and 3/8" () in either plain or serrated surface. Standard depths range from 1" (25mm) up to 4" (102mm), although larger sizes are available upon request.

    3.IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings that are subject to removal, they can be fastened with plate fasteners which are shop

    4.Welded steel bar grating is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. Welded bar grating is resistance welded to create a rugged, one-piece constructed panel. Standard panels are 2′, 3′ or 4′ wide by 20′ or 24′ long.

    5.Stock Sizes Panel Width in Inches Panel Length in Inches 24, 36 240, 288 Other bearing bar sizes and spacings are available. All grating can be cut to your specifications. When ordering GRATING, specify: Type of GRATING Size of BEARING BARS (Depth & Width) Span (direction of bearing bars) Dimensions of area

    MetalsDepot® - Buy Steel Bar Grating Online!

    1.Steel Bar Grating, also known as Welded Steel Bar Grate is extremely strong and durable for all load bearing applications and is primarily used for pedestrian and light vehicleBar Grating is available in a variety of bearing bar spacing and thicknesses depending on applications and load requirements.

    2.Standard Stair Tread and Carrier Plate dimensions shown in chart are typical for GW & GAL Series Bar Grating. Other Bar Grating Series Stair Treads are available. Stair Tread widths for 3/16" thick bearing bars are displayed above. When using 1/8" bearing bars, Stair Tread widths are 1/16" less. When using 1/4" bearing bars,

    3.Harsco Industrial has pioneered grating industry solutions for nearly 100 years ago and continues to be one of the world's leading producers of a broad range of high quality steel bar grating and aluminum bar grating.

    4.BAR GRATING WELDED BEARING BARS (1/8" & 3/16" THICK) & MAXIMUM PANEL WIDTHS CARBON, GALVANIZED & STAINLESS STEEL CHARTMaximum panel width dimensions are measured from outside to outside of bearing bars. Wider areas than indicated by maximum panel widths in chart can be covered by two or more pieces with proper structural support.

    5.Bar Grating G-Clamp Product Details G clips consist of an upper saddle that connects to a bottom portion using a hex headed cap screw. A variety of saddles are available for use with different grating spacing sizes. The lower component connects to the underside of the structural beam, holding the grating firmly in place. Multiple […]

    Steel Grating

    1.Steel Grating. Steel bar grating is the staple of the grating industry, mainly used for flooring applications. They can be fabricated to suit any customers' needs. Welded Bar Grating. The most economical choice of steel grating product. This grating is manufactured by an electro-forging process, welding rectangular bearing bars and cross rods.

    2.Standard Grating Panels. Kingde supplies Standard Grating Panels of various types for fitted in applications. Custom sizes are also available upon request. Highly versatile grating structure is provided in more than fifty standard types and is readily cut or customised to any specific requirement. Popular Standard Panels:

    3.carrying capacity for the same span and depth of bearing bar and greater walking comfort. Both can be ordered with a serrated surface for addi-tional safety. Aluminum stair treads, due to their light weight, high strength, corro-END PLATE DIMENSIONS Grating Depth “B” dimension “C” dimension up to 1-1/4" 1-3/4" 2-1/2" 1-1/2" to 1-3

    4.The open ends of the grating panels can be banded to provide additional transverse stiffness and a finished architectural appearance. This is achieved by welding a flat bar, similar in size to the bearing bars, to the cut ends of the grating. Trim banding should always be specified when gratings are designed to be removable.

    5.Attach devices to grating surface. Galvanized J-Bolts are designed for use mounting instrumentation, equipment stands, and other objects to varying types of grating. The “J” portion of the J-Bolt hooks underneath one bar of the grating. The threaded portion of the J-Bolt protrudes above the top of the grating.

    Bar Grating - 19W4/19W2 Welded Carbon Steel Grating

    1.Shop 19W4/19W2 welded carbon steel bar grating at Brown-Campbell. 1-3/16in. Center to center of bearing bars. Commonly used where pedestrian and/or vehicular traffic is present, 19w4 and 19w2 bar grating is available in a large array of bar sizes, finishes, and surfaces.

    2.Main standard grating products we offer with specifications for reference. Our customers can also choose from our detail specification lists for our Steel Bar Grating Standard Products, as below, with Vertical Bar Spacing, Horizontal Bar Spacing and Supporting Steel Bar Sizes.

    3.Metal Stair Treads, Bar Grating Treads, Diamond Plate Treads, Algrip Stair Treads, Channel Grating Treads, Aluminum Stair Treads, Shur Grip Stair Treads, Mebac Z Treads, Grip Span Stair Treads, Open Riser Stair Treads, and Closed Riser Stair Treads from your source for material handling equipment.

    4.Grating code (For example: SA 255/40) Bearing bar type (Plain or Serrated) Size of b anding bars, if b anding bar is required. Non-st andard welding on b anding bar must be noted too. Quantity and size of panels required; please supply drawings (if available) showing – All dimensions – Bearing bar direction – Section size and location of

    5.At McNICHOLS we stock and fabricate many sizes of Welded Bar Grating. Our Welded products include styles from 3/4" to 3" Bearing Bars with bar thicknesses of 1/8" or 3/16". Applications include walkways, platforms and trenches. In stock panels or cut-to-size at all 19 locations. Call us today.

    Bar Grating FAQS & Specifications |

    1.FAQsWhat is the most common type of bar grating? The most common type is 19-W-4 (194). What are the most commonly stocked panel sizes for bar grating? The most common panel sizes are 3' X 20', 3' X 24', 2' X 20', and 2' X 24'. What are the most commonly stocked bar sizes (height and thickness)?

  • Metal Grade Building Materials In Korea | South Korea Metal Building Materials Manufacturers
  • Types Of Steel Grate Stairs Dealer | Grating Stair Treads
  • Hot Dipped Metal Grate Dealer Applications Ditch Cover In Colombia | Ditch Cover Ditch Cover Suppliers and Manufacturers at
  • Inquiry Expanded Steel Grating In Syria | Expanded Metal Grating
  • Metal Grate Platform Dimensions Applications Building Materials Germany | Metal Bar Grating
  • Platform Grating Distributor Chad | Platform Grating
  • Where To Buy 125X125mm Grating Series In Laos | NSYCAG125LPF
  • Quotation Non Slip Metal Grating Applications Ship In Austria | Grating Quote Request
  • G254/30/100 Grating Availability Morocco | G254/40/100 Grating Inquiry
  • Hot Dipped Black Steel Grating Weight Applications Fence Korea | Short Lead Time for Hot Dipped Galvanized Steel Grating
  • Hot Sell Metal Grate Cover Retailers For Traffic In Japan | Trench Drain Grates In Various Materials and Styles on
  • G505/30/100 Grating For Fence United States | Custom Aluminum Bar Grating Stainless Steel Gratings